Cutters & Accesories

Graphtec FC9000 Series Vinyl Cutter The flagship FC9000 Series is Graphtec’s most advanced, versatile roll-fed cutting plotter to date. Revered aro...

Max. Cutting Speed: 24" per second in all direction Supporting a cutting force of 4.41N (450gf) expands application possibilities. ARMS...

Max. Cutting Speed: 24" per second in all direction Supporting a cutting force of 4.41N (450gf) expands application possibilities. ARMS...

A media catch basket compatible with Graphtec CE6000 Plus Series - 120 Cutting area of CE6000-120 Plus when using basket is 3 ft 11 in x 16 ft 4.85...

This muffler is effective in noise reduction from the vacuum hold-down motor of the FC2250 Flatbed Series—without diminishing the effectiveness of ...

Creasing Tool (wheel) Roller Type 0.6 mm for Corrugated Cardboard. Compatible Models# Flatbeds; FC2250, FCX2000 Series

For cardboard and fluted boards. Compatible Models# Flatbeds; FCX2000, FC2250 Series

3.0mm, Bladeholder for CB30UC-1 blade / For Thick Rigid Materials / For use with FC2250, and FCX2000. Ballpoint pen holder for black, oil-based pen...

Perfect for large rolls of media and extended cutting distances. Includes one pair of media flanges.

Roller type creasing tool for card stock, cardboard.  Compatible with FCX2000 Series.

For heavy media, card stock, and chipboard. Compatible Models# FC, and FCX Series

3.0mm, Bladeholder for CB30UC-1 blade / For Thick Rigid Materials / For use with FC2250, and FCX2000. Ballpoint pen holder for black, oil-based pen...

Angle 45° Diameter 3mm super steel blade for cutting thick rigid materials such as corrugated paper up to E flute or chipboard up to 2 mm thick. Co...

Angle 60° Diameter 1.5mm Supersteel Blade for cutting rigid media, 0.25 mm to 1.5 mm thick.  And also small detailed characters on marking film (up...

The NEW Graphtec Fiber-tip pen holder for *STAEDTLER LUMOcolor Fiber pens gives you the versatility of high quality, re-usable fiber tip pen holder...

Angle 45° Diameter 1.5mm  Supersteel blade for cutting rigid or thicker media, 0.25 mm to 0.5 mm thick. (laminates, smart device, device screen pro...

Compatible with blades: CB09UA, CB09UA-K60, CB09UB, CB09UB-K60.  0.9mm Blade-holder with blue top, and brass tip / for 0.9mm CB09 blades. ATTENTION...

Compatible with blades: CB15U, CB15U-2SP, CB15U-5SP, CB15U-K30*, CB15UA, CB15U-K20-2SP, CB15UA-K30.  1.5mm*** Blade-holder with Red Top, and Brass ...

Compatible with blades: CB09UB, CB09UB-K60 0.9mm, blue top, black brass tip. ATTENTION: If you are using CB09UA Blade (with spring); Insert only th...

Ballpoint pen holder for a black, oil-based pen (KB700-BK).  Shown assembled with the KB700-BK (sold separately).Accessories: BALLPOINT PEN BLACK ...

Creasing tool 0.03” fine tipped creasing tool for paper. Not recommended for E-flute creasing; Fine tip may puncture corrugated boards. Compatible ...

Creasing tool 0.05” tip creasing tool for cardboard Compatible with Graphtec FCX, FC series

SuperSteel replacement cross cutting blade for all FC8600, FC8000, FC7000 MK2 and FC7000 cutting plotters.